AOV International is one of the world’s leading manufacturer of community deep/ Shallow well water Hand pumps. Our pumps conform to the required relevant national and International standards. We are an ISO 9001: 2000 certified company.

We are manufacture a wide range of deep well and shallow Hand pumps, which includes the most popular India Mark II, India Mark III, India Mark II extra deep well Hand pumps etc of very high quality. These pumps are manufactured as per the specifications laid by the Bureau of Indian Standards. Besides, Afridev and U3 modified Deep-well Hand pumps are produced as per the specifications laid by SKAT HTN (Switzerland).

Deepwell Hand Pumps
 

Afridev
Afridev Pumps
Pump Type : Afridev deep well hand pump as per SKAT-HTN Switzerland specifications, with 50mm dia open top, UPVC brass lined cylinder assembly with extractable plunger and foot valves assemblies.

Recommended for water level setting depth (metres) : upto 45 Meter.

Minimum ID of bore (milimetre) : 100

Approximate Discharge (Litres/Hour) : 990

UPVC Riser Pipe = 63mm OD * 4.7mm Wall Theckness * 3 Meter length
MS/SS Connecting Rod Diameter = 10mm
(12mm Dia can loaded also be supplied)
Stroke Length= 225± 6mm
 


India Mark II
India Mark II Pumps
Pump Type : India Mark II Deep well Hand pump as per Bureau of Indian Standard Specifications with 63.5mm dia cast iron brass sleeved cylinder assembly.

Recommended for water level setting depth (metres) : 20-45

Minimum ID of bore (milimetre) : 100

Approximate Discharge (Litres/Hour) : 900

Cyclinder Stroke Length - 125 ± 4 mm
GI Riser Pipe = 32 mm NB * 3 meter length
MS/SS Connecting Rod Diameter = 12mm * 3 meter length
 


Force Lift
Force Lift

Force lift and motorized Conversion kits/attachments are available for the deepwel pumps. The force lift pumping system/arrangement is designed to deliver water upto a height of 15 meters from ground level.

MS/SS Connecting Rod Diameter = 12mm
 


India Mark III [50 mm NB]
India Mark III Pumps
Pump Type : India Mark III well Hand pump as per Bureau of Indian Standard Specifications with 50 mm dia cast iron brass sleeved open cylinder assembly.

Recommended for water level setting depth (metres) :20*45

Minimum ID of bore (milimetre) : 100

Approximate Discharge (Litres/Hour) : 600

Cyclinder Stroke Length - 125 ± 4 mm
GI Riser Pipe = 65 mm NB * 3 Meter length
MS/SS Connecting Rod Diameter = 12mm * 3 Meter length
 


India Mark III [65 mm NB]
India Mark III [65 mm NB]
Pump Type : India Mark III Deep well Hand pump as per Bureau of Indian Standard Specifications with 63.5mm dia cast iron brass sleeved open top cylinder assembly.

Recommended for water level setting depth (metres) :20*45

Minimum ID of bore (milimetre) : 125

Approximate Discharge (Litres/Hour) : 900

Cyclinder Stroke Length - 125 ± 4 mm
GI Riser Pipe = 65 mm NB * 3 meter length
MS/SS Connecting Rod Diameter = 12mm * 3 meter length
 


U3 Modified Hand pump
U3 Modified Hand pump
Pump Type : U3 modified deep well hand pump as per SKAT-HTN Switzerland specifications with 50mm dia open top, UPVC brass lined cylinder assembly with extractable plunger and foot valves assemblies.

Recommended for water level setting depth (metres) : 20-45

Minimum ID of bore (milimetre) : 100

Approximate Discharge (Litres/Hour) : 600

UPVC - Riser Pipe 63 mm ODX 4.7wt*3meters length.

MS/SS Conneting Rod Dia = 12mm
Stroke Length= 125 ± 5mm